Barefoot FootPrint 01

The Footprint01 is an active 3-way speaker that shares the same Thomas Barefoot signature designs. Dual-Force technology opposing sub woofers and dual ring radiator tweeter

The Barefoot Sound Footprint01 features dual opposing 8-inch paper cone subwoofers, a 4-inch aluminum cone midrange driver and a 1-inch dual ring radiating tweeter, components that all share a lineage with Barefoot's other products.

The 2-way DSP crossover feeds dual Class D amplifier modules that drive the subwoofers with 500W of power and deliver 150W to the mid- and high-frequency drivers. There is a passive crossover network between the midrange driver and the tweeter. The midrange woofer is positioned above the tweeter in an unusual speaker geometry that creates the acoustic focus in the center of the cabinet.

Thomas Barefoot's approach to reference monitor speaker design has always been to provide audio professionals with exemplary sound quality, wide dynamic range and bass extension at every stage of the audio production process, from recording through mixing to mastering. But not every project begins or ends in a high-end studio that offers Barefoot MicroMain or MasterStack monitors. The new Footprint01 model is Barefoot Sound's response to evolving modern workflows, making the company's ultra-high performance technologies available to audio professionals working in home-based facilities, smaller writing, editing or post production rooms, or on the road. Now, composers, songwriters, musicians, beat-makers, post production specialists and others can benefit from the Barefoot sound, whatever their work environment.


● MEME Technology Voice Emulation
● Dual-Force Technology
● Dual Ring Radiator Tweeter
● 650 Watts of Power


Description: 3-way active monitor with MEME™ voice emulation
Controls: Input level stepped attenuator, MEME voice select
Input Impedance: Balanced XLR, 50k Ohm Impedance
Sensitivity: 90dB @ 1 meter with -15dBV input signal (Level control set to 0dB)

Frequency Response
● 36Hz - 45kHz (±3dB)
● 45Hz - 40kHz (±1dB)

Bass Response
● -3 dB @ 36Hz
● Q = 0.707
● Slope = 18 dB/octave

● 18 liters total internal volume
● Sealed woofer and midrange enclosures
● Machined aluminum baffle plate
● Long fiber wool acoustic damping throughout

Crossover Frequencies: 250 / 3600 Hz (Passive crossover between Midrange and Tweeter)
Tweeter: 1 ring radiator, Low distortion motor, Rear waveguide chamber
Midrange: 4.0 aluminum cone, Aluminum phase plug, Low distortion motor, +/- 3.5 mm linear excursion
Woofers: 8 paper cone, +/- 9.5 mm linear excursion
High Frequency Amplifier: 150W
Low Frequency Amplifier: 500W
AC Power Input: 85 VAC to 265 VAC
Power Consumption: Idle: 2W, Maximum: 765W

We use cookies to give you the best experience. Read our cookie policy.